By Pass Filtration

$ How Do I Get Amsoil At Wholesale Prices $

  • Dealership (wholesale pricing-sell to others to earn cash and commissions  FEE $30 per yr)
  • Preferred customer account (wholesale pricing for yourself and friends $10for 6mo / $20 per yr - no reselling)
  • Retail Account (wholesale pricing for you to sell at your store Registered business required -no yrly fee)
  • Commercial account   (wholesale pricing for you to use in your work equipment Reg business required -no fee)

PRODUCT DESCRIPTION
AMSOIL Ea By-Pass Oil Filters (EaBP) provide the best possible filtration protection against wear and oil degradation. Working in conjunction with the engine’s full-flow oil filter, AMSOIL Ea By-Pass Filters operate by filtering oil on a “partial-flow” basis. They draw approximately 10 percent of the oil pump’s capacity at any one time and trap the extremely small, wear-causing contaminants that full-flow filters can’t remove. The AMSOIL Ea By-Pass Filter typically filters all the oil in the system several times an hour, so the engine continuously receives analytically clean oil.

Higher Efficiency
AMSOIL EaBP Filters have an efficiency of 98.7 percent at two microns. At normal operating RPMs the EaBP Filter will filter all of the oil in a typical five quart sump in less than 10 minutes.

Superior Construction
The superior construction of AMSOIL EaBP Filters provides better sealing and increased longevity along with superior corrosion resistance. AMSOIL EaBP Filters have a marine powder coated exterior; and their zinc-dichromate base plates increase rust protection. EaBP Filters have a nitrile HNBR gasket and an orange silicone anti-drain valve. The two stage pleated and layered cellulose/full synthetic media has an efficiency rating of 98.7 percent at two microns.

Click on diagram for larger viewLonger Lasting
When used in conjunction with AMSOIL motor oil and an AMSOIL EaO or Donaldson Endurance™ filter, the EaBP Filter should be changed every other full-flow filter change up to 60,000 miles. When used with other brands of motor oil or full-flow filters, the EaBP Filter should be changed every other full-flow filter change. AMSOIL recommends using oil analysis when extending oil drain intervals.

Increased Oil Capacity
The increased fluid system capacity and filtration life provides improved oil cooling and ensures that equipment constantly runs on clean oil. Engine efficiency is increased, providing extended engine life.

Soot Removal
Click for larger graph imageAMSOIL has designed a new high-efficiency by-pass filter element that is also a soot removal device. AMSOIL Ea By-Pass Filters use a synthetic/cellulose sandwiched media. The inner layer of the element is composed of a highly efficient cellulose media covered with a full synthetic media outer layer. According to ISO 23556 testing, these filters remove 39 percent of soot contaminants less than one micron. Soot removal efficiency increases approximately 10 to 14 percent when the EaBP Filter is used in conjunction with a standard full-flow filter.

By-Pass Filtration Benefits

• Dramatically Extended Drain Intervals
• Improved Oil Cooling
• Increased Filtration Capacity and Life
• Increased Fluid System Capacity
• Efficient Small Particle and Soot Removal
• Significantly Extended Engine Life
• Equipment Constantly Runs on Clean Oil
• Increased Engine Efficiency
• Remove Particles Less Than One Micron

AMSOIL By-Pass Filter Replacement Chart

AMSOIL By-Pass Filter Replacement Chart
Type of Unit Stock Number Size (Approx.) Additional Oil Needed Crankcase Capacity Applications
SINGLE SPIN-ON ELEMENT

(Used with BMK21 or any DUAL REMOTE SYSTEM)

EaBP90 Diam. = 4.3 in.
Height = 5.8 in.
With Mnt. = 8 in.
1 qt. up to 9 qt. Pleasure Vehicles, Light Trucks and Smaller Commercial Applications
EaBP100 Diam. = 4.3 in.
Height = 7.3 in.
With Mnt. = 10 in.
1.5 qt. up to 15 qt.
EaBP110 Diam. = 4.3 in.
Height = 10.4 in.
With Mnt. = 12 in.
2 qt. up to 21 qt.
DUAL SPIN-ON ELEMENT

(Used with BMK22
DUAL-GUARD)

(2) EaBP90 Width = 5 in.
Length = 9.5 in.
Height = 8 in.
2 qt. 15 to 18 qt. Large Trucks, Construction, Farm and Industrial Equipment

(minimum sump capacity = 15 qt.)

(2) EaBP100 Width = 5 in.
Length = 9.5 in.
Height = 10 in.
3 qt. 15 to 30 qt.
(2) EaBP110 Width = 5 in.
Length = 9.5 in.
Height = 12 in.
4 qt. 15 to 42 qt.
SPIN-ON ELEMENT

(Used with BMK30
Heavy-Duty By-Pass System)

(1) EaBP120 Width = 5.35 in.
Length = 12.12 in.
Height = 17.5 in.
4 qt. 15 to 42 qt. Large Trucks, Construction, Farm and Industrial Equipment, (minimum sump capacity = 15 qt.), the BMK30 kit can be mounted in series for sump capacities greater than 42 quarts.
Normal Service Life b:When used in conjunction with AMSOIL motor oil and an EaO or Donaldson Endurance filter, EaBP Filters should be changed every other full flow filter change up to 60,000 miles. When used with other brands of motor oil or full flow filters, the EaBP filter should be changed every other full flow filter change. AMSOIL recommends using oil analysis when extending oil drain intervals.

a. Filters can be used on sumps of larger capacity but then require more frequent replacement. Full details on service life included with filter installation instructions.

b. Data determined in a non-turbo gasoline engine with AMSOIL 100% Synthetic Motor Oil and AMSOIL Ea Full-Flow Oil Filter. Service life varies in other engines (turbo and diesel) and with other
oils and filters.

NOTES:
1. Special adapters and hardware may be required for some installations.
2. Contact AMSOIL INC. Technical Services for instructions before installing on vehicles with cast aluminum oil pans. Call 715-399-TECH (8324)

APPLICATIONS:

Vehicles with sump capacities up to and including 15 qts
Mount Filter
BMK21 (Filters sold separately) Any size AMSOIL Ea By-Pass Filter Element
BMK23 (Filters and spin-on adapter sold separately) Any size AMSOIL Ea By-Pass Filter Element, and 3/4"-16 thread EaO filter as room permits
BMK25 Cummins Diesels
(Filters and spin-on adapter included)
EaO26 and EaBP100 Ea By-Pass Filter Element
BMK26 International Diesels
(Filters and spin-on adapter included
)
EaO26 and EaBP100 Ea By-Pass Filter Element
BMK27 Duramax Diesels (in GM Pick-ups)
(Filters and spin-on adapter included)
EaO26 and EaBP100 Ea By-Pass Filter Element
Vehicles with sump capacities greater than 15 qts
Mount Filter
BMK22 Dual Gard (Hose and filters sold separately) Any size AMSOIL Ea By-Pass
(mount requires 2 filters)
BMK30 Dual Gard (Hose and filters sold separately) EaBP120 Ea By-Pass Filter Element



How to order Amsoil at the lowest possible price

Synthetic Distribution, authorized distributor of Amsoil, the  Finest Quality synthetic lubrication products on the market today!  
From synthetic motor oil, compressor oil, 2 cycle oil to synthetic grease and gear lube, Amsoil has it all. No need to worry about what products are right for you, we can match up your application with the correct Amsoil product and have it shipped directly to your door step in a matter of days. Let us work with you and answer any questions you might have about our synthetic products. Simply fill out this form
What do I need? or use the Product Application Guide  to get your needs answered. You may also email your question to  synthetic-distribution@q.com . We will do our very best to respond to your email within 24 hrs. Mon-Fri.

AMSOIL Inc. manufactured the first API-rated synthetic motor oil (in 1972) and has led the industry ever since. Currently, the AMSOIL product line includes the finest quality synthetic motor oils, synthetic diesel oils, synthetic greases, industrial lubricants, oil filter, air filter and more. AMSOIL also provides a business opportunity that is second to none, plus purchasing plans for retail outlets and commercial fleets.

 THE AMSOIL CORPORATE HEADQUARTERS, MANUFACTURING PLANT, AND MAIN DISTRIBUTION CENTER are located in Superior, Wisconsin, with several regional warehouses strategically located throughout North America and overseas. These facilities cover a total of nearly 700,000 square feet.

The state-of-the-art lubricant production plant contains materials blending and bulk storage facilities, as well as highspeed bottling lines and packaging equipment. The main warehouse serves as the hub of a global distribution network; bottles, cases, drums and totes bearing the AMSOIL label are shipped worldwide. Capacity is geared to meet projected market demands decades away.

The AMSOIL administrative functions are centrally located and outfitted with the latest in communications and information processing equipment. The entire complex is staffed by a cooperative, knowledgeable and well-disciplined team of approximately 300 employees.

AMS OIL  is Proudly Made in the U.S.A.

AMS OIL is America's Oil.

Largest and Most Knowledgeable AMSOIL Group in the U.S & Canada led by the only AMSOIL Regency Platinum 6 Star Direct Jobber in the Organization who is also a former Ford Motor Company Senior Powertrain and Chassis Engineer.

Home | Contact Us | On-Line Store | Privacy Policy

Synthetic Distribution

Joe Lee

7384 lake dr

Lino Lakes, MN 55014

Phone: 763-213-9163

Email: synthetic-distribution@q.com

 

 

 

 

 

Website Builder